Lines Matching refs:KERN_DEBUG
380 printk(KERN_DEBUG
410 printk(KERN_DEBUG
432 printk(KERN_DEBUG
440 printk(KERN_DEBUG "HFC_wait(chip %d); in %s() line %d\n",
724 printk(KERN_DEBUG "Wrote 0x%x to register 0x%x but got back "
743 printk(KERN_DEBUG "VPM: Chip %d: ver %02x\n", x, ver);
769 printk(KERN_DEBUG "VPM: A-law mode\n");
772 printk(KERN_DEBUG "VPM reg 0x20 is %x\n", reg);
777 printk(KERN_DEBUG "NLP Thresh is set to %d (0x%x)\n", reg, reg);
823 printk(KERN_DEBUG "Got interrupt 0x%x from VPM!\n", gpi2);
923 printk(KERN_DEBUG "%s: RESYNC(syncmaster=0x%p)\n",
929 printk(KERN_DEBUG "using provided controller\n");
952 printk(KERN_DEBUG
963 printk(KERN_DEBUG "id=%d (0x%p) = syncronized with "
974 printk(KERN_DEBUG "Schedule jatt PLL\n");
981 printk(KERN_DEBUG
988 printk(KERN_DEBUG
993 printk(KERN_DEBUG
1019 printk(KERN_DEBUG "%s: GOT sync on card %d"
1027 printk(KERN_DEBUG "%s: LOST sync on card %d"
1047 printk(KERN_DEBUG "%s: entered\n", __func__);
1060 printk(KERN_DEBUG "%s: release PLXSD card %d\n",
1076 printk(KERN_DEBUG "%s: PCM off: PLX_GPIO=%x\n",
1099 printk(KERN_DEBUG "%s: done\n", __func__);
1125 printk(KERN_DEBUG "%s: entered\n", __func__);
1160 printk(KERN_DEBUG "%s: changing to 128K external RAM\n",
1171 printk(KERN_DEBUG "%s: changing to 512K external RAM\n",
1193 printk(KERN_DEBUG "%s: initializing PLXSD card %d\n",
1210 printk(KERN_DEBUG "%s: slave/term: PLX_GPIO=%x\n",
1228 printk(KERN_DEBUG "%s: card %d is between, so "
1238 printk(KERN_DEBUG
1256 printk(KERN_DEBUG "%s: setting PCM into slave mode\n",
1261 printk(KERN_DEBUG "%s: setting PCM into master mode\n",
1266 printk(KERN_DEBUG "%s: performing PCM auto detect\n",
1301 printk(KERN_DEBUG "%s: master: PLX_GPIO=%x\n",
1307 printk(KERN_DEBUG "%s: slave: PLX_GPIO=%x\n",
1341 printk(KERN_DEBUG
1363 printk(KERN_DEBUG
1372 printk(KERN_DEBUG
1419 printk(KERN_DEBUG "%s: master: "
1431 printk(KERN_DEBUG "HFC_multi F0_CNT %ld after "
1454 printk(KERN_DEBUG "%s: reset off: PLX_GPIO=%x\n",
1483 printk(KERN_DEBUG "%s: enabling DTMF detection "
1530 printk(KERN_DEBUG "%s: setting ST master clock "
1542 printk(KERN_DEBUG "r_irqmsk_misc.2: 0x%x\n",
1558 printk(KERN_DEBUG
1565 printk(KERN_DEBUG "aborting - %d RAM access errors\n", err);
1571 printk(KERN_DEBUG "%s: done\n", __func__);
1839 printk(KERN_DEBUG "%s: dtmf detection irq\n", __func__);
1850 printk(KERN_DEBUG "%s: dtmf channel %d:",
1908 printk(KERN_DEBUG "%s: No memory for skb\n",
1990 printk(KERN_DEBUG
2023 printk(KERN_DEBUG "%s(card %d): reread z2 because "
2047 printk(KERN_DEBUG
2081 printk(KERN_DEBUG "%s: buffer empty, so we have "
2092 printk(KERN_DEBUG "%s: disconnecting PCM due to "
2132 printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space "
2223 printk(KERN_DEBUG
2233 printk(KERN_DEBUG "%s(card %d): reread z2 because "
2276 printk(KERN_DEBUG "%s(card %d): fifo(%d) reading %d "
2284 printk(KERN_DEBUG
2302 printk(KERN_DEBUG
2311 printk(KERN_DEBUG
2324 printk(KERN_DEBUG "%s: No mem\n",
2333 printk(KERN_DEBUG "%s(card %d):",
2353 printk(KERN_DEBUG
2373 printk(KERN_DEBUG "%s: %s\n", __func__, msg);
2397 printk(KERN_DEBUG "Enable SYNC_I\n");
2405 printk(KERN_DEBUG "Enable jatt PLL\n");
2410 printk(KERN_DEBUG
2436 printk(KERN_DEBUG
2498 printk(KERN_DEBUG
2513 printk(KERN_DEBUG
2524 printk(KERN_DEBUG
2534 printk(KERN_DEBUG
2544 printk(KERN_DEBUG
2583 printk(KERN_DEBUG "%s: reread "
2616 printk(KERN_DEBUG
2778 printk(KERN_DEBUG "%s: reread "
2785 printk(KERN_DEBUG
2810 printk(KERN_DEBUG "%s: got V_IRQ_PROC -"
2873 printk(KERN_DEBUG
2882 printk(KERN_DEBUG "%s: remove from slot %d (TX)\n",
2892 printk(KERN_DEBUG
2902 printk(KERN_DEBUG
2911 printk(KERN_DEBUG
2935 printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
2964 printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
3014 printk(KERN_DEBUG
3018 printk(KERN_DEBUG
3163 printk(KERN_DEBUG "%s: protocol not known %x\n",
3234 printk(KERN_DEBUG
3256 printk(KERN_DEBUG
3291 printk(KERN_DEBUG
3316 printk(KERN_DEBUG "%s: unknown command %x\n",
3361 printk(KERN_DEBUG
3369 printk(KERN_DEBUG
3397 printk(KERN_DEBUG
3404 printk(KERN_DEBUG
3486 printk(KERN_DEBUG "%s: PH_ACTIVATE ch %d (0..32)\n",
3504 printk(KERN_DEBUG
3523 printk(KERN_DEBUG
3530 printk(KERN_DEBUG "%s: HFC_SPL_LOOP_OFF\n",
3586 printk(KERN_DEBUG "%s: RX_OFF request (nr=%d off=%d)\n",
3596 printk(KERN_DEBUG "%s: HW_FEATURE request\n",
3619 printk(KERN_DEBUG
3639 printk(KERN_DEBUG "%s: HFC_PCM_DISC\n",
3646 printk(KERN_DEBUG "%s: HFC_CONF_JOIN conf %d\n",
3659 printk(KERN_DEBUG "%s: HFC_CONF_SPLIT\n", __func__);
3664 printk(KERN_DEBUG "%s: HFC_ECHOCAN_ON\n", __func__);
3673 printk(KERN_DEBUG "%s: HFC_ECHOCAN_OFF\n",
3696 printk(KERN_DEBUG "%s: cmd:%x %p\n",
3740 printk(KERN_DEBUG
3745 printk(KERN_DEBUG
3778 printk(KERN_DEBUG
3801 printk(KERN_DEBUG "%s: S/T NT newstate %x\n",
3861 printk(KERN_DEBUG "%s: entered\n", __func__);
3914 printk(KERN_DEBUG "%s: E1 port is NT-mode\n",
3920 printk(KERN_DEBUG "%s: E1 port is TE-mode\n",
3936 printk(KERN_DEBUG
3944 printk(KERN_DEBUG
3951 printk(KERN_DEBUG "%s: E1 port is "
3994 printk(KERN_DEBUG
4003 printk(KERN_DEBUG
4055 printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__,
4062 printk(KERN_DEBUG "%s: change protocol %x to %x\n",
4137 printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_INIT mode %s"
4157 printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_RESET\n",
4184 printk(KERN_DEBUG "%s: cmd:%x %p\n",
4214 printk(KERN_DEBUG "%s: dev(%d) close from %p\n",
4226 printk(KERN_DEBUG "%s: unknown command %x\n",
4259 printk(KERN_DEBUG "%s: entered\n", __func__);
4284 printk(KERN_DEBUG "%s: IRQ %d count %d\n",
4297 /* printk(KERN_DEBUG "no master irq set!!!\n"); */
4305 printk(KERN_DEBUG "%s: IRQ %d count %d\n",
4309 printk(KERN_DEBUG "%s: done\n", __func__);
4332 printk(KERN_DEBUG "%s: free irq %d\n", __func__, hc->irq);
4339 printk(KERN_DEBUG "%s: done (err=%d)\n", __func__, err);
4530 printk(KERN_DEBUG "%s: entered for port %d\n",
4540 printk(KERN_DEBUG "%s: releasing port=%d\n",
4572 printk(KERN_DEBUG
4594 printk(KERN_DEBUG
4608 printk(KERN_DEBUG
4625 printk(KERN_DEBUG "%s: free port %d channel D(%d)\n", __func__,
4631 printk(KERN_DEBUG "%s: done!\n", __func__);
4641 printk(KERN_DEBUG "%s: release card (%d) entered\n",
4655 printk(KERN_DEBUG "%s: free irq %d (hc=%p)\n",
4664 printk(KERN_DEBUG "%s: disable all channels (d and b)\n",
4679 printk(KERN_DEBUG "%s: remove instance from list\n",
4684 printk(KERN_DEBUG "%s: delete instance\n", __func__);
4689 printk(KERN_DEBUG "%s: card successfully removed\n",
4704 printk(KERN_DEBUG
4717 printk(KERN_DEBUG "%s: PORT set "
4726 printk(KERN_DEBUG "%s: PORT set "
4735 printk(KERN_DEBUG
4745 printk(KERN_DEBUG
4755 printk(KERN_DEBUG "%s: PORT turn on CRC4 report:"
4762 printk(KERN_DEBUG "%s: PORT turn off CRC4"
4769 printk(KERN_DEBUG "%s: PORT force getting clock from "
4776 printk(KERN_DEBUG "%s: PORT force putting clock to "
4784 printk(KERN_DEBUG "%s: PORT disable JATT PLL on "
4793 printk(KERN_DEBUG
4933 printk(KERN_DEBUG
4958 printk(KERN_DEBUG
4968 printk(KERN_DEBUG
5020 printk(KERN_DEBUG "%s: Registering %s:%s chip type %d (0x%x)\n",
5155 printk(KERN_DEBUG
5283 printk(KERN_DEBUG "%s: drvdata already removed\n",
5489 printk(KERN_DEBUG "%s: IRQ_DEBUG IS ENABLED!\n", __func__);
5496 printk(KERN_DEBUG "%s: init entered\n", __func__);