Lines Matching defs:these
98 /* these are variables for documentation and experimentation purposes */
367 /* these are the error bits in the tid flows, and are W1C */
424 /* these are the (few) counters that are not port-specific */
632 * these 5 fields are used to establish deltas for IB symbol
1083 * All of these potentially need to have a buffer disarmed
1128 * All of these are "per port", so renamed:
1371 u64 these, lmask;
1377 these = (errs & msp->mask);
1378 lmask = (these & (these - 1)) ^ these;
1669 /* do these first, they are most important */
2325 * Set up per-VL credits. Below is kluge based on these assumptions:
2463 /* always enable these on driver reload, not sticky */
4515 /* Write these registers before the context is enabled. */
4569 /* Now that the context is disabled, clear these registers. */
5690 * these are in their canonical postions (e.g. lsb of
5772 /* these may be adjusted in init_chip_wc_pat() */
6227 * Some of these should be redundant on reset, but play safe.
6279 * Some of these should be redundant on reset, but play safe.
6348 val = TIDFLOW_ERRBITS; /* these are W1C */
6407 /* now that piobcnt2k and 4k set, we can allocate these */
6445 * we need these to do initial chip register accesses.
6456 /* link_recovery setup causes these errors, so ignore them,
7886 /* setup LoS params; these are subsystem, so chan == 5 */
8020 /* setup LoS params; these are subsystem, so chan == 5 */
8342 /* these are common for all IB port use cases. */