Lines Matching defs:DEV_LABEL
160 #define DEV_LABEL "lanai"
165 printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
169 printk(KERN_ERR DEV_LABEL ": " format, ##args); \
181 printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
559 printk(KERN_ERR DEV_LABEL
798 printk(KERN_ERR DEV_LABEL "(itf %d): Timed out on "
853 printk(KERN_INFO DEV_LABEL "(itf %d): *NOT* reading EEPROM\n",
924 printk(KERN_ERR DEV_LABEL "(itf %d): error reading EEPROM byte %d\n",
967 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM checksum bad "
974 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM inverse checksum "
982 printk(KERN_ERR DEV_LABEL
994 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM serial numbers "
1004 printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM magic numbers "
1011 printk(KERN_WARNING DEV_LABEL "(itf %d): warning - EEPROM "
1072 printk(KERN_INFO DEV_LABEL "(itf %d): %s changed from %s\n",
1093 printk(KERN_INFO DEV_LABEL "(itf %d): PCI got %s error\n", itf, name);
1102 printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: "
1113 printk(KERN_ERR DEV_LABEL "(itf %d): can't write PCI_STATUS: "
1258 printk(KERN_ERR DEV_LABEL "(itf %d): butt register "
1349 printk(KERN_INFO DEV_LABEL
1356 printk(KERN_INFO DEV_LABEL ": vcc_tx_aal0: not implemented\n");
1401 printk(KERN_INFO DEV_LABEL "(itf %d): Got bad AAL5 length "
1425 printk(KERN_INFO DEV_LABEL ": vcc_rx_aal0: not implemented\n");
1491 printk(KERN_WARNING DEV_LABEL "(itf %d): wanted %d bytes "
1563 printk(KERN_CRIT DEV_LABEL "(itf %d): *NOT* resetting - not "
1684 printk(KERN_ERR DEV_LABEL "(itf %d): Got AAL5 stream "
1826 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - DMA "
1835 printk(KERN_ERR DEV_LABEL "(itf %d): re-enabling DMA\n",
1843 printk(KERN_ERR DEV_LABEL "(itf %d): sent PCI target abort\n",
1848 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
1855 printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
1920 printk(KERN_ERR DEV_LABEL ": Found %s board-id %d -- not a "
1937 printk(KERN_ERR DEV_LABEL "(itf %d): can't enable "
1943 printk(KERN_WARNING DEV_LABEL
1953 printk(KERN_ERR DEV_LABEL "(itf %d): can't write "
2139 printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n");
2198 DEV_LABEL, lanai)) != 0) {
2199 printk(KERN_ERR DEV_LABEL ": can't allocate interrupt\n");
2217 printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=%p, irq=%u "
2220 printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), "
2252 printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n",
2328 DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n", lanai->number,
2449 return sprintf(page, DEV_LABEL "(itf %d): chip=LANAI%s, "
2561 printk(KERN_ERR DEV_LABEL
2566 atmdev = atm_dev_register(DEV_LABEL, &pci->dev, &ops, -1, NULL);
2568 printk(KERN_ERR DEV_LABEL
2595 .name = DEV_LABEL,